MB Connect Line mbNET MDH 810 Manual Download Page 106

Page: 106 / 226

Page 106 of 226
Version: 3.3.5

– DR05 – 23.03.2017

System - Logging

15.5

System logging for the

mbNET

can be outsourced to another computer by using a log server.

Label

Description

Set debug output to syslog

Output debug info to the syslog.

Log also to USB-Device

The logs are also being saved to an USB-Device.

Enable Remote Logging

To enable a log server, place a check in the box by clicking on it. System log-
ging for the

mbNET

industrial router can now be outsourced to another com-

puter.

Remote IP address

Remote IP address of log server. In this case: 192.168.0.65

Remote Port

Remote port for log server. In this case: Port 514

We recommend to not change this port, as certain applications may not work
properly on a completely different port.

Summary of Contents for mbNET MDH 810



































































































































































































































Search results

Summary of Contents for mbNET MDH 810

Reviews:

Related manuals for mbNET MDH 810

Brands by name

Popular brands

MB Connect Line mbNET MDH 810, Manual

Search results

Summary of Contents for mbNET MDH 810

Reviews:

Related manuals for mbNET MDH 810

Brands by name

Popular brands