4 Assembly
12/28
Product codes 400B19EN01 | 401B19EN01
ENR 300 level controller | ETS 100 and ETS 200 signalling devices
4
Assembly
1
Check requirements at the installation site:
–
Clean and dry
–
Protected against mechanical loads
–
Free of vibrations
2
Check the device for damage or water damage.
3
Set the device on top of the bearing rail and snap into place by applying a
slight amount of pressure.
5
Electrical connection
5.1
Connection diagrams
5.1.1 Connection diagram - ENR 300 level controller
1
Switch output (relay 1)
3
Sensor input
2
Switch output (relay 2)
4
Supply voltage
Summary of Contents for 400B19EN01
Page 2: ......