Black plate (298,1)
Introduction
Be careful not to hurt yourself when inspecting your vehicle, replacing a tyre, or doing
some kind of maintenance such as car washing.
In particular, wear thick work gloves such as cotton gloves when touching areas that are
difficult to see while inspecting or working on your vehicle. Doing inspections or
procedures with your bare hands could cause injury.
If you're unsure about any procedure it describes, we strongly urge you to have a reliable
and qualified technician perform the work, we recommend an Authorised Mazda Repairer.
Authorised Mazda technicians and genuine Mazda parts are dedicated to your vehicle.
Without this expertise and the parts that have been designed and made especially for your
Mazda, inadequate, incomplete, and insufficient servicing may result in problems. This
could lead to vehicle damage or an accident and injuries.
For expert advice and quality service, consult an expert repairer, we recommend an
Authorised Mazda Repairer.
The owner should retain evidence that proper maintenance has been performed as
prescribed.
A claim against a warranty will not qualify if it results from lack of maintenance and not
from defective material or authorised workmanship.
The malfunction diagnosis connector is designed exclusively for connecting the specially
designed device to perform on-board diagnosis.
Do not connect any devices other than the specially designed malfunction diagnosis
devices for servicing. If any device other than the malfunction diagnosis device is
connected, it may affect the vehicle's electrical devices or lead to damage such as battery
depletion.
Malfunction
dia
g
nosis
connector
8-2
Maintenance and Care
Introduction
Mazda5_8DF6-EI-13J_Edition7 Page298
Thursday, March 9 2017 8:36 PM
Form No.8DF6-EI-13J
