Mazda Mazda5 Owner'S Manual Download Page 106

Page: 106 / 380

Black plate (106,1)

Sunshade

The sunshade can be opened and closed
by hand.

The sunshade opens automatically when
the sunroof is opened, but must be closed
by hand.

Sunshade

CAUTION

The sunshade does not tilt. To avoid
damaging the sunshade, do not push
up on it.

Do not close the sunshade while the
sunroof is opening. Trying to force
the sunshade closed could damage it.

3-34

Knowing Your Mazda

Doors and Locks

Mazda5_8DF6-EI-13J_Edition7 Page106
Thursday, March 9 2017 8:34 PM

Form No.8DF6-EI-13J

Summary of Contents for Mazda5





























































































































































































































































































































































































Search results

Summary of Contents for Mazda5

Reviews:

Related manuals for Mazda5

Brands by name

Popular brands

Mazda Mazda5, Owner'S Manual

Search results

Summary of Contents for Mazda5

Reviews:

Related manuals for Mazda5

Brands by name

Popular brands