manualshive.com logo in svg

Mazda Demio, Owner'S Manual

Get ready to explore all the features and capabilities of your Mazda Demio with the Owner's Manual. Download the manual for free from manualshive.com to learn everything from maintenance tips to advanced settings. Don't miss out on this essential resource for getting the most out of your Demio.

Share
Download
background image

Black plate (263,1)

q

Adding Brake/Clutch Fluid

WARNING

Be careful not to spill brake fluid on
yourself or on the engine:

Spilled brake fluid is dangerous. If it
gets in your eyes, they could be
seriously injured. If this happens,
immediately flush your eyes with
water and get medical attention.
Brake fluid spilled on a hot engine
could cause a fire.

If the brake/clutch fluid level is low,
have the brakes and clutch inspected:

Low brake/clutch fluid levels are
dangerous. Low levels could signal
brake lining wear or a brake system
leak. Your brakes could fail and
cause an accident.

If the fluid level is low, add fluid until it
reaches MAX.
Before adding fluid, thoroughly clean the
area around the cap.

CAUTION

Ø

Brake and clutch fluid will
damage painted surfaces. If brake
or clutch fluid does get on a
painted surface, wash it off with
water immediately.

Ø

Using nonspecified brake and
clutch fluids (page 10-4) will
damage the systems. Mixing
different fluids will also damage
them.
If the brake/clutch system
frequently requires new fluid,
consult an Authorized Mazda
Dealer.

Automatic transaxle Fluid
(ATF)

í

q

Inspecting Automatic transaxle
Fluid Level

The automatic transaxle fluid level should
be inspected regularly. Measure it as
described below.

The volume of fluid changes with
temperature. Fluid must be checked while
idling the engine without driving at
normal operating temperature.

CAUTION

Ø

Low fluid level causes transaxle
slippage. Overfilling can cause
foaming, loss of fluid, and
transaxle malfunction.

Ø

Use specified fluid (page 10-4). A
nonspecified fluid could result in
transaxle malfunction and failure.

1. Park on a level surface and set the

parking brake firmly.

2. Start the engine and depress the brake

pedal.

3. Move the shift lever through all ranges

and set it at P.

WARNING

Make sure the brake pedal is applied
before shifting the shift lever:

Shifting the shift lever without first
depressing the brake pedal is
dangerous. The vehicle could move
suddenly and cause an accident.

4. With the engine still idling, pull out the

dipstick, wipe it clean, and put it back.

Maintenance and Care

Owner Maintenance

8-17

í

Some models.

Mazda2_8CL7-EA-12H_Edition1 Page263
Monday, June 18 2012 1:49 PM

Form No.8CL7-EA-12H

Downloaded from 

www.Manualslib.com

 

manuals search engine

 

Summary of Contents for Demio







































































































































































































































































































































































Reviews:

No comments

Related manuals for Demio

AA Products X31 Instruction Manual preview
X31
Brand: AA Products Pages: 6
CAMPARK R10 Manual preview
R10
Brand: CAMPARK Pages: 20
Hama Neptun Manual preview
Neptun
Brand: Hama Pages: 6
Yakima Whispbar K887W Fitting Instructions Manual preview
Whispbar K887W
Brand: Yakima Pages: 19
Nav TV UCI-11C NTV-KIT331 User Manual preview
UCI-11C NTV-KIT331
Brand: Nav TV Pages: 4
GMC Chevrolet Silverado 2500HD 2021 Owner'S Manual preview
Chevrolet Silverado 2500HD 2021
Brand: GMC Pages: 433
Spiral Audio KT-FI001PB Nstallation Instructions preview
KT-FI001PB
Brand: Spiral Audio Pages: 2
Maserati Gransport Owner'S Manual preview
Gransport
Brand: Maserati Pages: 210
OnStar liveon Owner'S Manual preview
liveon
Brand: OnStar Pages: 22
Veigel S47290920 Installation And Operating Instructions Manual preview
S47290920
Brand: Veigel Pages: 24
Cellular Line interphone Instruction Manual preview
interphone
Brand: Cellular Line Pages: 25
Webasto Telestart T91 Installation Instructions Manual preview
Telestart T91
Brand: Webasto Pages: 18
Saab 2000 9-5 2.3 Turbo Ecopower Owner'S Manual preview
2000 9-5 2.3 Turbo Ecopower
Brand: Saab Pages: 256
CITROËN Jumpy Miltispace Owner'S Handbook Manual preview
Jumpy Miltispace
Brand: CITROËN Pages: 164
Directed MIT4 Firmware Specific Manual preview
MIT4
Brand: Directed Pages: 30
KLAUS Multiparking trendvario6X00 Service Manual preview
trendvario6X00
Brand: KLAUS Multiparking Pages: 72
Connects2 CTUPO01 Quick Start Manual preview
CTUPO01
Brand: Connects2 Pages: 8
CITROEN 1953 Traction Avant User Manual preview
1953 Traction Avant
Brand: CITROEN Pages: 26

Brands by name

Popular brands

Load more brands