Mazda Demio Owner'S Manual Download Page 226

Page: 226 / 358

Black plate (226,1)

Jack

To remove the jack

1. Remove the cover.

2. Turn the wing bolt and jack screw

counterclockwise.

Wing bolt

Jack screw

To secure the jack

1. Insert the wing bolt into the jack with

the jack screw pointing down and turn
the wing bolt clockwise to temporarily
tighten it.

2. Turn the jack screw in the direction

shown in the figure.

Wing bolt

Jack screw

3. Turn the wing bolt completely to

secure the jack.

NOTE

If the jack is not completely secured, it could
rattle while driving. Make sure the jack screw
is sufficiently tightened.

Maintenance

Always keep the jack clean.

Make sure the moving parts are kept
free from dirt or rust.

Make sure the screw thread is
adequately lubricated.

7-4

In Case of an Emergency

Flat Tire

Mazda2_8CL7-EA-12H_Edition1 Page226
Monday, June 18 2012 1:49 PM

Form No.8CL7-EA-12H

Downloaded from

www.Manualslib.com

manuals search engine

Summary of Contents for Demio







































































































































































































































































































































































Search results

Summary of Contents for Demio

Reviews:

Related manuals for Demio

Brands by name

Popular brands

Mazda Demio, Owner'S Manual

Search results

Summary of Contents for Demio

Reviews:

Related manuals for Demio

Brands by name

Popular brands