Black plate (19,1)
1. Verify that the seat belt is secured in
the belt clip.
Belt clip
2. Lift the seatbacks upright.
3. Make sure that the seat belt is neither
stuck in the rear seat nor twisted, then
remove the seat belt from the belt clip.
Head Restraints
Your vehicle is equipped with head
restraints on all outboard seats. The head
restraints are intended to help protect you
and the passengers from neck injury.
WARNING
Always drive with the head restraints
installed when seats are being used
and make sure they are properly
adjusted. In addition, always raise the
head restraints mentioned below when
they are being used:
Driving with the head restraints
adjusted too low or removed is
dangerous. With no support behind
your head, your neck could be
seriously injured in a collision.
(Head restraints which must be
raised for use)
Rear outboard head restraints
Essential Safety Equipment
Seats
2-7
Mazda2_8CL7-EA-12H_Edition1 Page19
Monday, June 18 2012 1:48 PM
Form No.8CL7-EA-12H
Downloaded from
www.Manualslib.com
manuals search engine