Mazda CX-8, Quick Manual

Page: 210 / 624

Signal Indicator Page
(Green)
*
Cruise Set Indication 4-170
*
1 The light turns on when the ignition is switched on for an operation check, and turns off
a few seconds later or when the engine is started. If the light does not turn on or remains
turned on, have the vehicle inspected at an expert repairer, we recommend an
Authorised Mazda Repairer.
*
2 The light turns on continuously when the electric parking brake (EPB) is applied.
▼ Wrench Indication
The wrench indication is displayed under
the following conditions.

When the preset maintenance period has
arrived.
Refer to Maintenance Monitor on page
6-7.

When the engine oil has deteriorated.

(SKYACTIV-D 2.2)

When the engine oil is deteriorated or
exceeds the specified amount.

When fuel filter (sedimentor) draining
is required. Consult an expert repairer,
we recommend an Authorised Mazda
Repairer.
NOTE

The wrench indication may display
earlier than the preset period depending
on vehicle usage conditions.
▼
Low Engine Coolant Temperature
Indicator Light (Blue)
The light illuminates continuously when
the engine coolant temperature is low and
turns off after the engine is warm.
▼
Glow Indicator Light
(SKYACTIV-D 2.2)
When the ignition is switched ON, the
glow indicator light turns on. The glow
indicator light turns off when preheating is
finished.
A problem in the system might be
indicated under the following conditions.
Have your vehicle inspected by an expert
repairer, we recommend an Authorised
Mazda Repairer.

The glow indicator light does not turn
on when the ignition is switched ON or
it remains on.

The glow indicator light is flashing.
When Driving
Instrument Cluster and Display
4-34
*Some models.
CX-8_8HJ9-EI-19E_Edition2_old 2020-4-15 13:00:04