Mazda CX-5, Manual

Page: 315 / 840

NOTE

The DAA operates when all of the following conditions are met.

The vehicle speed is about 65 to 140 km/h (41 to 86 mph).

The system detects white (yellow) lane lines.

The system has completed learning of the driver’s driving data.

The DAA does not operate under the following conditions.

The vehicle speed is less than about 65 km/h (41 mph).

The vehicle speed exceeds about 140 km/h (86 mph)

The vehicle is making a sharp turn.

The vehicle is changing lanes.

The system cannot detect white (yellow) lane lines.

The DAA may not operate normally under the following conditions.

White (yellow) lane lines are less visible because of dirt or fading/patchiness.

The vehicle is jolted or swayed continuously by strong winds or rough roads.

The vehicle is driven aggressively.

When making frequent lane changes.

The DAA detects driver fatigue and decreased attentiveness based on the driving data
when the vehicle is driven at about 65 to 140 km/h (41 to 86 mph) for about 20 minutes.
The driving data will be reset under the following conditions.

The vehicle is stopped for 15 minutes or longer.

The vehicle is driven at less than about 65 km/h (41 mph) for about 30 minutes.

The ignition is switched off.

After the DAA has displayed the first message encouraging rest, it does not display the
next one until 45 minutes have passed.
▼
Driver Attention Alert (DAA)
Display
When the system detects driver fatigue or
decreased attentiveness, it activates the
warning sound and displays an alert in the
multi-information display.
▼
Cancelling Driver Attention Alert
(DAA)
The DAA can be set to not activate.
Refer to Personalisation Features on page
9-13.
When Driving
i-ACTIVSENSE
4-157
CX-5_8HD5-EE-18K_Edition2 2018-11-22 13:14:48