Mazda CX-5 Manual Download Page 281

Page: 281 / 840

▼

Control Status Display (With i-stop Function)

The i-stop operation status and the i-ELOOP power generating status are displayed.

Indication on display

Control status

With i-ELOOP system

Displays the level of electricity generated by regen-

erative braking.

Displays the amount of the electricity stored in the

rechargeable battery.

With i-ELOOP system

Displays the status of the electricity stored in the re-

chargeable battery and being supplied to the electrical
devices (whole vehicle in display is illuminated simul-
taneously).

Displays the accumulated fuel economy.



Instrument Cluster (Type A)

Synchronized (linked) with the average fuel econo-
my displayed in the trip meter (TRIP A).
Refer to Average Fuel Economy on page 4-29.



To reset, press the

icon in the menu. (The aver-

age fuel economy and TRIP A displayed in the trip
meter (TRIP A) reset at the same time.)



Instrument Cluster (Type B)

Synchronized (linked) with the average fuel econo-
my displayed in the trip meter (TRIP A).
Refer to Average Fuel Economy on page 4-47.



To reset, press the

icon in the menu. (The aver-

age fuel economy and TRIP A displayed in the trip
meter (TRIP A) reset at the same time.)



Instrument Cluster (Type C)

Synchronized (linked) with the average fuel econo-
my displayed in the trip computer.
Refer to Trip Computer on page 4-64.



To reset, press the

icon in the menu. (The aver-

age fuel economy displayed in the trip computer re-
sets at the same time.)

When Driving

Fuel Economy Monitor

4-123

CX-5_8HD5-EE-18K_Edition2

2018-11-22 13:14:48

Summary of Contents for CX-5









































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-5

Reviews:

Related manuals for CX-5

Brands by name

Popular brands

Mazda CX-5, Manual

Search results

Summary of Contents for CX-5

Reviews:

Related manuals for CX-5

Brands by name

Popular brands