background image

Interior light

All the light bulbs are the LED type.

Tyres

Sample tyre mark and its meaning

1. Nominal section width
2. Nominal aspect ratio in %
3. Construction code
4. Nominal rim diameter in inches
5. Load index (not on ZR tyres)
6. Speed symbol
7. Mud and snow
 

Tyre mark information

Choose the proper tyres for your vehicle using the following tyre mark information.

Speed symbol

Maximum permissible speed

Q

Up to 160 km/h (99 mph)

R

Up to 170 km/h (105 mph)

S

Up to 180 km/h (111 mph)

T

Up to 190 km/h (118 mph)

U

Up to 200 km/h (124 mph)

H

Up to 210 km/h (130 mph)

V

Up to 240 km/h (149 mph)

W

Up to 270 km/h (167 mph)

Y

Up to 300 km/h (186 mph)

ZR

Over 240 km/h (149 mph)

Tyre and inflation pressure

NOTE

The tyres have been optimally matched with the chassis of your vehicle.
When replacing tyres, Mazda recommends that you replace tyres of the same type
originally fitted to your vehicle. For details, contact an expert repairer (we
recommend an Authorised Mazda Repairer).

Check the tyre pressure label for tyre size and inflation pressure.

Specifications

Specifications

9-10

CX-30_8HQ1-EE-19I_Edition2_new

2019-10-17 16:47:52

Summary of Contents for CX-30 2020









































































































































































































































































































































































































































































































































































































































































































Reviews: