Mazda BT-50 2017 Owner'S Manual Download Page 93

Page: 93 / 322

Black plate (95,1)

4. Press and hold the

SET/RESET

button

to set the currently displayed language.

5. A chime will be heard to confirm the

selection.

6. The display will then return to normal

operation.

Units of measure

To select metric or imperial units for
outside temperature display:

1. Change display mode to

“

Outside

Temperature.

”

2. Press and hold the

SET/RESET

button

for more than two seconds and the
units will change.

Toggling the units of measure using this
display will affect the following displays:

Outside air temperature.

The temperature display in the
automatic air-conditioning.

The set temperature in the multi-
function display.

Information Displays

Mazda BT-50_8FX5-EI-17DT_Edition2 Page95
Thursday, May 11 2017 5:31 PM

Form No.8FX5-EI-17DT

Summary of Contents for BT-50 2017



































































































































































































































































































































Search results

Summary of Contents for BT-50 2017

Reviews:

Related manuals for BT-50 2017

Brands by name

Popular brands

Mazda BT-50 2017, Owner'S Manual

Search results

Summary of Contents for BT-50 2017

Reviews:

Related manuals for BT-50 2017

Brands by name

Popular brands