Mazda BT-50 2017 Owner'S Manual Download Page 200

Page: 200 / 322

Black plate (202,1)

CHANGING A ROAD
WHEEL

Locking wheel nuts

You can obtain a replacement locking
wheel nut key and replacement locking
wheel nuts from your repairer using the
reference number certificate.

Vehicle jack

WARNING

The vehicle jack supplied with your
vehicle should only be used when
changing a wheel in emergency
situations.

Before using the vehicle jack, check
that it is not damaged or deformed
and that the thread is lubricated
and free from foreign matter.

Never place anything between the
jack and the ground, or the jack
and the vehicle.

It is recommended to use a workshop type
hydraulic jack for changing between
summer and winter tyres.

NOTE

Use a jack with a minimum lifting
capacity of one tonne (one ton) and a
lifting plate with a minimum diameter
of 80 millimetres (3.1 inches).

The jack, wheel brace, and jack handle are
located in the cab.

Regular cab

1. Fold the LH seatback forward.

2. Remove the locking strap and remove

the tools.

3. Fold the RH seatback forward.

4. Loosen the jack, remove the bolt and

remove the jack.

194

Wheels and Tyres

Mazda BT-50_8FX5-EI-17DT_Edition2 Page202
Thursday, May 11 2017 5:34 PM

Form No.8FX5-EI-17DT

Summary of Contents for BT-50 2017



































































































































































































































































































































Search results

Summary of Contents for BT-50 2017

Reviews:

Related manuals for BT-50 2017

Brands by name

Popular brands

Mazda BT-50 2017, Owner'S Manual

Search results

Summary of Contents for BT-50 2017

Reviews:

Related manuals for BT-50 2017

Brands by name

Popular brands