background image

The brightness increases by rotating the
knob to the right.

Dim

Bright

Function for cancelling illumination
dimmer

The illumination dimmer can be canceled
by rotating the dashboard illumination
knob to the right until a beep sound is
heard while the instrument cluster is
dimmed with the ignition switched ON. If
the instrument cluster's visibility is
reduced due to glare from surrounding
brightness, cancel the illumination
dimmer.

NOTE

When the illumination dimmer is
canceled, the instrument cluster cannot
be dimmed even if the position lights are
turned on.

When the illumination dimmer is
canceled, the screen in the center
display switches to constant display of
the daytime screen.

Outside Temperature Display

*

When the ignition is switched ON, the
outside temperature is displayed.
 

NOTE

Under the following conditions, the
outside temperature display may differ
from the actual outside temperature
depending on the surroundings and
vehicle conditions:

Significantly cold or hot temperatures.

Sudden changes in outside
temperature.

The vehicle is parked.

The vehicle is driven at low speeds.

Cruise Control Set Vehicle Speed
Display

*

The vehicle speed preset using the cruise
control is displayed.
 

When Driving

Instrument Cluster and Display

*Some models.

4-17

Mazda3_8GE4-EA-17F_Edition1

2017-4-7 11:59:21

Summary of Contents for 3 2018

















































































































































































































































































































































































































































































































































































































































Reviews: