background image

Opening and Closing the Liftgate/
Trunk Lid

Opening the liftgate (5–door)

Using the electric liftgate opener

Unlock the doors and liftgate, then press
the electric liftgate opener on the liftgate
and raise it when the latch releases.
 

Electric liftgate 
opener

NOTE
(With the advanced keyless function)

A locked liftgate can also be opened
while the key is being carried.

When opening the liftgate with the doors
and the liftgate locked, it may require a
few seconds for the liftgate latch to
release after the electric liftgate opener
is pressed.

The liftgate can be closed when the
doors are locked with the key left in the
vehicle. However, to prevent locking the
key in the vehicle, the liftgate can be
opened by pressing the electric liftgate
opener. If the liftgate cannot be opened
despite doing this procedure, first push
the liftgate/trunk lid completely closed,
then press the electric liftgate opener to
fully open the liftgate.

When the liftgate latch is released by
pressing the electric liftgate opener, the
liftgate raises slightly. If the liftgate is
not operated for a certain period of
time, the liftgate cannot be raised.

To open

Press the electric liftgate/trunk lid
opener again.

To close

To close the liftgate/trunk lid from its
slightly raised position, open it first by
pressing the electric liftgate/trunk lid
opener, then close it after waiting at
least 1 second.

If the liftgate is not fully closed, the
driver is notified by a warning indicated
in the instrument cluster.

If the vehicle battery is dead or there is
a malfunction in the electrical system
and the liftgate cannot be unlocked, the
liftgate can be opened by performing the
emergency procedure.
Refer to When Liftgate/Trunk Lid
Cannot be Opened on page 7-43
.

Opening the trunk lid (4–door)

Using the remote release button

Push the release button.
 

Before Driving

Doors and Locks

3-21

Mazda3_8GE4-EA-17F_Edition1

2017-4-7 11:59:21

Summary of Contents for 3 2018

















































































































































































































































































































































































































































































































































































































































Reviews: