CALIPER (FRONT) DISASSEMBLY/ASSEMBLY
http://am.mazdaserviceinfo.com/emazda/dealersystem/service/esi/en_us/SM/2013/CX5/mv/books/mvw04/html/id041100801000.html[1/7/13 9:34:14 AM]
5Piston seal
6Caliper body
2. Assemble in the reverse order of removal.
Piston Disassembly Note
WARNING:
When compressed air is blown into the caliper body, injury to a finger or other part from
pinching could result from the piston springing up. When blowing in compressed air, do not
place your fingers between the piston and caliper body when performing the work.
CAUTION:
The piston could be damaged if blown out with great force. Blow the compressed air slowly
to prevent the piston from suddenly popping out.
1. Insert a piece of wood in the caliper as shown in the figure and blow compressed air through
the hole to remove the piston from the caliper body.
© 2012 Mazda North American Operations, U.S.A.
