Mazda 2009 MX-5 Miata Owner'S Manual Download Page 58 | Manualshive

Page: 58 / 444

background image

Black plate (58,1)

Do not increase the total seated weight on the passenger seat:

When an infant or small child sits on the passenger seat, increasing the total seated
weight on the passenger seat from the total seated weight of approximately 30 kg
(66 lbs) is dangerous. The passenger seat weight sensors will detect the increased
total seated weight, which could result in the unexpected deployment of the
passenger front and side air bags and seat belt pretensioner system in an accident
and may cause serious injury. Increasing the total seated weight on the passenger
seat beyond the total seated weight of approximately 30 kg (66 lbs) could result in
the passenger front and side air bags and seat belt pretensioner system deployment
in an accident under the following conditions, for example:

Ø

The total seated weight of the child with the child-restraint system on the
passenger seat is approximately 30 kg (66 lbs) or more.

Ø

Luggage or other items are placed on the seat with the child in the child-restraint
system.

Ø

The seat is washed.

Ø

Liquids are spilled on the seat.

Ø

The passenger seat is moved backward, and it is pushed into luggage or other
items placed behind it.

Ø

Luggage or other items are placed between the passenger seat and center
console.

Ø

Any accessories which might increase the total seated weight on the passenger
seat are attached to the passenger seat.

The passenger front and side air bags and seat belt pretensioner systems will
deactivate if the total seated weight on the passenger seat is close to 30 kg (66 lbs)
and they will reactivate before the weight exceeds 42 kg (93 lbs).

CAUTION

Ø

To assure proper deployment of the front air bag and to prevent damage to the
sensors in the seat bottoms:

Ø

Do not place sharp objects on the seat bottoms or leave heavy luggage on
them.

Ø

Do not spill any liquids on the seats or under the seats.

Ø

To allow the sensors to function properly, always perform the following:

Ø

Adjust the seats as far back as possible and always sit upright against the
seatbacks with seat belts worn properly.

Ø

If you place your child on the passenger seat, secure the child-restraint system
properly and slide the passenger seat as far back as possible.

2-46

Essential Safety Equipment

SRS Air Bags

MX-5_8Z78-EA-08K_Edition1 Page58
Thursday, October 23 2008 1:52 PM

Form No.8Z78-EA-08K

«
...
56
57
58
59
60
...
»

Summary of Contents for 2009 MX-5 Miata





























































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2009 MX-5 Miata

Brand: Honda Pages: 32

10-8002-C11670C

Brand: Saleen Pages: 17

Brand: Dodge Pages: 24

Brand: Chevrolet Pages: 428

Brand: Cadillac Pages: 20

Brand: Tesla Pages: 274

Brand: Honda Pages: 569

Brand: Lexus Pages: 830

Brand: Prorack Pages: 14

Brand: Valeo Pages: 29

Brand: Alu-Cab Pages: 6

Brand: Adaptiv Mini Pages: 4

Brand: Kuda Pages: 3

Brand: Dakota Digital Pages: 2

Brand: DV8 Pages: 14

Brand: Lenoxx Pages: 10

Brand: Sony Ericsson Pages: 116

Brand: Sune Technology Pages: 33

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands