Mazda 2009 MX-5 Miata Owner'S Manual Download Page 405 | Manualshive

Page: 405 / 444

background image

Black plate (405,1)

Uniform Tire Quality Grading System (UTQGS)

This information relates to the tire grading system developed by the U.S. National
Highway Traffic Safety Administration for grading tires by tread wear, traction, and
temperature performance.

q

Tread Wear

The tread wear grade is a comparative rating based on the wear rate of the tire when tested
under controlled conditions on a specified government test course.
For example, a tire graded 150 would wear one-and-a-half times as well on the government
course as a tire graded 100.

The relative performance of tires depends upon the actual conditions of their use, however,
and may depart significantly from the norm because of variations in driving habits, service
practices and differences in road characteristics and climate.

q

Traction-AA, A, B, C

The traction grades, from highest to lowest, are AA, A, B, and C. These grades represent
the tire's ability to stop on wet pavement as measured under controlled conditions on
specified government test surfaces of asphalt and concrete. A tire marked C may have poor
traction performance.

WARNING

The traction grade assigned to this tire is based on braking (straight ahead) traction
tests and does not include acceleration cornering (turning), hydroplaning, or peak
traction characteristics.

q

Temperature-A, B, C

The temperature grades A (the highest), B, and C, represent the tire's resistance to the
generation of heat and its ability to dissipate heat when tested under controlled conditions
on a specified indoor laboratory test wheel.
Sustained high temperature can cause the material of the tire to degenerate and reduce tire
life, and excessive temperatures can lead to sudden tire failure.

Grade C corresponds to a level of performance which all passenger vehicle tires must meet
under the Federal Motor Vehicle Safety Standard No. 109. Grades B and A represent
higher levels of performance on the laboratory test wheel than the minimum required by
law.

Customer Information and Reporting Safety Defects

Uniform Tire Quality Grading System (UTQGS)

9-21

MX-5_8Z78-EA-08K_Edition1 Page405
Thursday, October 23 2008 1:54 PM

Form No.8Z78-EA-08K

«
...
403
404
405
406
407
...
»

Summary of Contents for 2009 MX-5 Miata





























































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2009 MX-5 Miata

Brand: Federal Signal Corporation Pages: 8

Brand: Federal Signal Corporation Pages: 8

Brand: Garmin Pages: 2

Lippert Components LEVELEGS MPD 66385

Brand: Atwood Pages: 6

65 41 2 152 528

Brand: BMW Pages: 21

Escalade ESV 2014

Brand: Cadillac Pages: 508

Brand: Hama Pages: 2

Brand: AddSecure Pages: 14

Brand: BURY Pages: 2

Brand: Honda Pages: 20

2009 Rio Series

Brand: Kia Pages: 219

Brand: ULTIMATE SPEED Pages: 6

Brand: SAFARI Pages: 5

Brand: Edelbrock Pages: 2

Brand: Mercedes-Benz Pages: 93

Brand: DRAGONFIRE Pages: 4

Brand: Pyle Pages: 14

Brand: HUSKY LINERS Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands