Mazda 2009 MX-5 Miata Owner'S Manual Download Page 365

Page: 365 / 444

Black plate (365,1)

7. Remove the adapter.

8. Install the new bulb in the reverse order

of the removal procedure.

Front fog light bulbs

1. Make sure the ignition is switched off,

and the headlight switch is off.

2. Turn the screws and the center section

of the plastic retainers
counterclockwise and remove them,
then partially peel back the mudguard.

Removal

Installation

3. Disconnect the electrical connector

from the bulb by pressing the tab on
the connector with your finger and
pulling the connector downward.

4. Turn the socket and bulb assembly to

remove it. Carefully remove the bulb
from its socket in the reflector by
gently pulling it straight backward out
of the socket.

5. Install the new bulb in the reverse order

of the removal procedure.

Front side-marker lights

1. Make sure the ignition is switched off,

and the headlight switch is off.

Maintenance and Care

Owner Maintenance

8-37

Some models.

MX-5_8Z78-EA-08K_Edition1 Page365
Thursday, October 23 2008 1:54 PM

Form No.8Z78-EA-08K

Summary of Contents for 2009 MX-5 Miata





























































































































































































































































































































































































































































Search results

Summary of Contents for 2009 MX-5 Miata

Reviews:

Related manuals for 2009 MX-5 Miata

Brands by name

Popular brands

Mazda 2009 MX-5 Miata, Owner'S Manual

Search results

Summary of Contents for 2009 MX-5 Miata

Reviews:

Related manuals for 2009 MX-5 Miata

Brands by name

Popular brands