Mazda 2009 MX-5 Miata Owner'S Manual Download Page 336

Page: 336 / 444

Black plate (336,1)

Scheduled Maintenance (Mexico)

Follow Schedule 1 if the vehicle is operated mainly where none of the following conditions
apply.

Repeated short-distance driving

Driving in dusty conditions

Driving with extended use of brakes

Driving in areas where salt or other corrosive materials are used

Driving on rough or muddy roads

Extended periods of idling or low-speed operation

Driving for long periods in cold temperatures or extremely humid climates

Driving in extremely hot conditions

Driving in mountainous conditions continually

If any do apply, follow Schedule 2.

NOTE

After the prescribed period, continue to follow the described maintenance at the recommended
intervals.

8-8

Maintenance and Care

Scheduled Maintenance

MX-5_8Z78-EA-08K_Edition1 Page336
Thursday, October 23 2008 1:54 PM

Form No.8Z78-EA-08K

Summary of Contents for 2009 MX-5 Miata





























































































































































































































































































































































































































































Search results

Summary of Contents for 2009 MX-5 Miata

Reviews:

Related manuals for 2009 MX-5 Miata

Brands by name

Popular brands

Mazda 2009 MX-5 Miata, Owner'S Manual

Search results

Summary of Contents for 2009 MX-5 Miata

Reviews:

Related manuals for 2009 MX-5 Miata

Brands by name

Popular brands