Mazda 2009 MX-5 Miata Owner'S Manual Download Page 304

Page: 304 / 444

Black plate (304,1)

Maximum vehicle speed with a
punctured run-flat tire: 90 km/h (55
mph)
Maximum driving distance with a
punctured rum-flat tire: 80 km (49
miles)

CAUTION

The maximum driving distance may
be shorter depending on the driving
conditions.

If a run-flat tire is punctured, carefully
drive the vehicle to the nearest Mazda
Dealer and have the tire changed.

NOTE

A spare tire or Instant Mobility System
(IMS) emergency flat tire repair kit is not
equipped on vehicles with run-flat tires as
standard.

Replacing a punctured run-flat tire with a
new run-flat tire is recommended.

Do not use run-flat tires and conventional
tires on the same vehicle.

Vehicle with conventional tires

If the following occurs while driving, it
could indicate a flat tire.

Steering becomes difficult.

The vehicle begins to vibrate
excessively.

The vehicle pulls in one direction. If a
conventional tire is punctured, refer to

“

Tool Storage

”

(page 7-5) and

“

Instant

Mobility System (IMS) Emergency
Flat Tire Repair Kit

”

(page 7-7).

7-4

In Case of an Emergency

Flat Tire

MX-5_8Z78-EA-08K_Edition1 Page304
Thursday, October 23 2008 1:54 PM

Form No.8Z78-EA-08K

Summary of Contents for 2009 MX-5 Miata





























































































































































































































































































































































































































































Search results

Summary of Contents for 2009 MX-5 Miata

Reviews:

Related manuals for 2009 MX-5 Miata

Brands by name

Popular brands

Mazda 2009 MX-5 Miata, Owner'S Manual

Search results

Summary of Contents for 2009 MX-5 Miata

Reviews:

Related manuals for 2009 MX-5 Miata

Brands by name

Popular brands