Mazda 2009 MX-5 Miata Owner'S Manual Download Page 286

Page: 286 / 444

Black plate (286,1)

Mute

The microphone can be muted during a
call.

1. Press the voice recognition/hands-free

switch with a short press.

Say:

[Beep]

“

Mute

”

Prompt:

“

Microphone muted

”

Canceling mute

1. Press the voice recognition/hands-free

switch with a short press.

Say:

[Beep]

“

Mute off

”

Prompt:

“

Microphone unmuted

”

Transferring a call

Transferring a call from Hands-Free to
a mobile phone

Communication between the hands-free
unit and a mobile phone is canceled, and
the line can be switched to a standard call
using a mobile phone.

1. Press the voice recognition/hands-free

switch with a short press.

Say:

[Beep]

“

Transfer call

”

Prompt:

“

Transferred call to phone

”

Transferring a call from a mobile
phone to Hands-Free

Communication between mobile phones
can be switched to the Bluetooth Hands-
Free system.

1. Press the voice recognition/hands-free

switch with a short press.

Say:

[Beep]

“

Transfer call

”

Prompt:

“

Transferred call to Hands

Free system

”

Call waiting

A call can be interrupted to receive an
incoming call from a third party.

Call interrupt

A call can be switched to a new incoming
call.
Press the voice recognition/hands-free
switch with a short press.

NOTE

To refuse an incoming call, press the voice
recognition/hands-free switch with a long
press.

After receiving a new incoming call, the
previous call is placed on hold.

Switching calls

Switching back to the previous call can
also be done.
Press the voice recognition/hands-free
switch with a short press.

Ending the current call

Press the voice recognition/hands-free
switch during the call with a long press.

Voice guidance interrupt operation

Voice guidance can be stopped by
pressing the voice recognition/hands-free
switch with a short press while it is being
heard. A new voice input command can
then be spoken by the user.
· Press the voice recognition/hands-free

switch with a short press.

Phone book settings

Editing phone book

The data registered to the Bluetooth
Hands-Free phone book can be edited.

6-70

Interior Comfort

Bluetooth Hands-Free

MX-5_8Z78-EA-08K_Edition1 Page286
Thursday, October 23 2008 1:54 PM

Form No.8Z78-EA-08K

Summary of Contents for 2009 MX-5 Miata





























































































































































































































































































































































































































































Search results

Summary of Contents for 2009 MX-5 Miata

Reviews:

Related manuals for 2009 MX-5 Miata

Brands by name

Popular brands

Mazda 2009 MX-5 Miata, Owner'S Manual

Search results

Summary of Contents for 2009 MX-5 Miata

Reviews:

Related manuals for 2009 MX-5 Miata

Brands by name

Popular brands