Mazda 2009 MX-5 Miata Owner'S Manual Download Page 194 | Manualshive

Page: 194 / 444

background image

Black plate (194,1)

q

Brake System Warning Light

This warning has the following functions:

Parking brake warning

The light illuminates when the parking
brake is applied with the ignition switch
in the START or ON position. It turns off
when the parking brake is fully released.

Low brake fluid level warning

If the light stays on after the parking brake
is fully released, you may have a brake
problem.

Drive to the side of the road and park off
the right-of-way.

You may notice that the pedal is harder to
depress or that it may go closer to the
floor. In either case, it will take longer to
stop the vehicle.

1. With the engine stopped, open the

hood and check the brake fluid level
immediately, and then add fluid if
required (page 8-22).

2. After adding fluid, check the light

again.

If the warning light remains on, or if the
brakes do not operate properly, do not
drive the vehicle. Have it towed to an
Authorized Mazda Dealer.

Even if the light turns off have your brake
system inspected as soon as possible by
an Authorized Mazda Dealer.

NOTE

Having to add brake fluid is sometimes an
indicator of leakage. Consult an Authorized
Mazda Dealer as soon as possible even if the
brake light is no longer illuminated.

WARNING

Do not drive with the brake system
warning light illuminated. Contact an
Authorized Mazda Dealer to have the
brakes inspected as soon as possible:

Driving with the brake system
warning light illuminated is
dangerous. It indicates that your
brakes may not work at all or that
they could completely fail at any
time. If this light remains
illuminated, after checking that the
parking brake is fully released, have
the brakes inspected immediately.

q

ABS Warning Light

The warning light stays on for a few
seconds when the ignition switch is turned
to the ON position.

If the ABS warning light stays on while
you're driving, the ABS control unit has
detected a system malfunction. If this
occurs, your brakes will function normally
as if the vehicle had no ABS.
Should this happen, consult an Authorized
Mazda Dealer as soon as possible.

5-42

Driving Your Mazda

Warning/Indicator Lights and Beep Sounds

MX-5_8Z78-EA-08K_Edition1 Page194
Thursday, October 23 2008 1:53 PM

Form No.8Z78-EA-08K

«
...
192
193
194
195
196
...
»

Summary of Contents for 2009 MX-5 Miata





























































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2009 MX-5 Miata

Brand: Porsche Pages: 192

signal mirror 2005-2009 Ford Mustang

Brand: muth Pages: 9

v.LOGiC Intelligent Solution V5-NTG46

Brand: Caraudio-Systems Pages: 18

Brand: StowAway 2 Pages: 2

Brand: Hella Pages: 21

Brand: EUFAB Pages: 16

Brand: Aries Pages: 5

Brand: Mercedes-Benz Pages: 354

CARWATT CV12-220C150

Brand: WATT Pages: 26

Brand: Honda Pages: 22

Brand: Mercedes-Benz Pages: 494

Brand: Dakota Digital Pages: 20

Brand: Volvo Pages: 92

Brand: Phonocar Pages: 28

Brand: Buick Pages: 371

Brand: Brodit Pages: 2

Brand: Westin Pages: 3

Brand: STO N SHO Pages: 7

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands