Mazda 2008 MazdaSpeed3 Owner'S Manual Download Page 96

Page: 96 / 394

Black plate (96,1)

To close to the desired position, push the
front of the tilt or slide switch.

Open

Sunshade

The sunshade can be opened and closed
by hand.

The sunshade opens automatically when
the moonroof is opened, but must be
closed by hand.

Sunshade

CAUTION

The sunshade does not tilt. To avoid
damaging the sunshade, do not push
up on it.

3-24

Knowing Your Mazda

Doors and Locks

Mazda3_8X41-EA-07F_Edition1 Page96
Wednesday, April 25 2007 1:4 PM

Form No.8X41-EA-07F

Summary of Contents for 2008 MazdaSpeed3











































































































































































































































































































































































































Search results

Summary of Contents for 2008 MazdaSpeed3

Reviews:

Related manuals for 2008 MazdaSpeed3

Brands by name

Popular brands

Mazda 2008 MazdaSpeed3, Owner'S Manual

Search results

Summary of Contents for 2008 MazdaSpeed3

Reviews:

Related manuals for 2008 MazdaSpeed3

Brands by name

Popular brands