Mazda 2008 MazdaSpeed3 Owner'S Manual Download Page 87

Page: 87 / 394

Black plate (87,1)

Opening the trunk lid with the key

Insert the key into the slot and turn it
clockwise.

Open

Opening the trunk lid with the remote
release lever

Pull up the release lever next to the
driver's seat.

Release lever

Closing the trunk lid

Use both hands to push the trunk lid down
until the lock snaps shut. Do not slam it.
Pull up on the trunk lid to make sure it is
secure.

Trunk Security

In some situations you may want to
prevent the trunk from being opened with
the remote trunk lid release lever.

Give your key only to someone you trust.

To secure the trunk lid, lock the rear
seatbacks (page 2-8), push the trunk lock
lever up, and close the trunk.

To cancel the security feature, insert the
key into the lock, turn the key clockwise,
and pull the trunk lock lever down.

Unlock

Lock

Trunk lock lever

Trunk Light

The trunk light is on when the lid is open
and off when it's closed.

Knowing Your Mazda

Doors and Locks

3-15

Mazda3_8X41-EA-07F_Edition1 Page87
Wednesday, April 25 2007 1:4 PM

Form No.8X41-EA-07F

Summary of Contents for 2008 MazdaSpeed3











































































































































































































































































































































































































Search results

Summary of Contents for 2008 MazdaSpeed3

Reviews:

Related manuals for 2008 MazdaSpeed3

Brands by name

Popular brands

Mazda 2008 MazdaSpeed3, Owner'S Manual

Search results

Summary of Contents for 2008 MazdaSpeed3

Reviews:

Related manuals for 2008 MazdaSpeed3

Brands by name

Popular brands