Mazda 2008 MazdaSpeed3 Owner'S Manual Download Page 369 | Manualshive

Page: 369 / 394

background image

Black plate (369,1)

Examples: Based on a single occupant weight of 68 kg (150 lbs), and a value of 385 kg
(849 lbs) for the

“

combination weight of occupants and cargo should never exceed

”

:

The cargo weight limit with one occupant is 385 kg (849 lbs) _ 68 kg (150 lbs) = 317 kg
(699 lbs)
The cargo weight limit with two occupants is 385 kg (849 lbs) _ (68 × 2) kg ( (150 × 2)
lbs) = 249 kg (549 lbs)
If the weight of the occupant increases, the cargo weight limit decreases by that much.

GAW (Gross Axle Weight)

is the total weight placed on each axle (front and rear) -

including vehicle curb weight and all payload.

GAWR (Gross Axle Weight Rating)

is the maximum allowable weight that can be carried

by a single axle (front or rear).

These numbers are shown on the Safety Compliance

Certification Label located on the driver's door frame or door pillar. The total load on
each axle must never exceed its GAWR.

GVW

GVW (Gross Vehicle Weight)

is the Vehicle Curb cargo + passengers.

GVWR (Gross Vehicle Weight Rating)

is the maximum allowable weight of the fully

loaded vehicle (including all options, equipment, passengers and cargo).

The GVWR is

shown on the Safety Compliance Certification Label located on the driver's door
frame or door pillar. The GVW must never exceed the GVWR.

Customer Information and Reporting Safety Defects

Tire Information (U.S.A.)

9-37

Mazda3_8X41-EA-07F_Edition1 Page369
Wednesday, April 25 2007 1:7 PM

Form No.8X41-EA-07F

«
...
367
368
369
370
371
...
»

Summary of Contents for 2008 MazdaSpeed3











































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2008 MazdaSpeed3

Brand: iDataLink Pages: 30

Brand: Ignition Pages: 1

Brand: Yakima Pages: 12

Brand: JEHNERT SOUND DESIGN Pages: 8

Experience Series

Brand: Rainbow Pages: 19

Brand: Yakima Pages: 12

DAF POWERCHOICE 250A

Brand: Paccar Pages: 20

Brand: Paxton Automotive Pages: 85

Brand: Thule Pages: 8

Brand: TATA Motors Pages: 236

Brand: Parkeon Pages: 43

Brand: PAC Pages: 14

Brand: Kolpin Pages: 3

Brand: RBO Pages: 15

Brand: TEINHOF Pages: 2

Brand: ULTIMATE SPEED Pages: 10

Brand: Ratio Pages: 12

Brand: Horn Tools Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands