Mazda 2008 MazdaSpeed3 Owner'S Manual Download Page 312

Page: 312 / 394

Black plate (312,1)

Brake lights/Taillights (4 Door)

With LED bulb

Due to the complexity and difficulty of
the procedure, the LED bulbs should be
replaced by an Authorized Mazda Dealer.

NOTE

LED bulb replacement is not possible. The
rear combination component must be replaced.

With Non-LED bulb

1. Pull the center of each plastic retainer

and remove the retainers and the trunk
end trim.

Removal

Installation

2. Pull the center of each plastic retainer,

then remove the retainers, and then
partially open the trunk side trim.

Removal

Installation

3. Turn the socket and bulb assembly

counterclockwise and remove it.

4. Disconnect the bulb from the socket.

5. Install the new bulb in the reverse order

of removal.

NOTE

To replace the bulb, contact an Authorized
Mazda Dealer.

Brake lights/Taillights (5 Door)

With LED bulb

Due to the complexity and difficulty of
the procedure, the LED bulbs should be
replaced by an Authorized Mazda Dealer.

NOTE

LED bulb replacement is not possible. The
rear combination component must be replaced.

8-44

Maintenance and Care

Owner Maintenance

Mazda3_8X41-EA-07F_Edition1 Page312
Wednesday, April 25 2007 1:7 PM

Form No.8X41-EA-07F

Summary of Contents for 2008 MazdaSpeed3











































































































































































































































































































































































































Search results

Summary of Contents for 2008 MazdaSpeed3

Reviews:

Related manuals for 2008 MazdaSpeed3

Brands by name

Popular brands

Mazda 2008 MazdaSpeed3, Owner'S Manual

Search results

Summary of Contents for 2008 MazdaSpeed3

Reviews:

Related manuals for 2008 MazdaSpeed3

Brands by name

Popular brands