Mazda 2008 MazdaSpeed3 Owner'S Manual Download Page 185 | Manualshive

Page: 185 / 394

background image

Black plate (185,1)

Mode selector dial

Turn the mode selector dial to select
airflow mode (page 6-4).

NOTE

l

If you want to slightly adjust the airflow
amount, set the mode selector dial at

.

l

For example, when the mode selector dial is
at the

position between the

and

positions, airflow from the floor vent is less
than that of the

position.

A/C switch

í

Push the A/C switch to turn the air
conditioner on. The indicator light on the
switch will illuminate when the fan
control dial is set at position 1, 2, 3, or 4.

Push the switch once again to turn the air
conditioner off.

NOTE

l

The air conditioner may not function when
the outside temperature approaches 0 °C
(32 °F).

l

(U.S.A., Canada)

When the mode is set to

or

with the

fan control dial in a position other than 0
and the temperature control dial in the
maximum cold position, the air intake
selector switches to the recirculated air
mode and the A/C turns on.
If A/C is not desired, press the A/C switch
to turn it off.

Air intake selector

This switch controls the source of air
entering the vehicle.

Press the

switch to alternate

between the outside air and recirculated
air modes.

It is recommended that under normal
conditions the switch be kept in the
outside air mode.

Outside air mode (indicator light
turned off)

Outside air is taken into the vehicle. Use
this mode for normal ventilation and
heating.

Recirculated air mode (indicator light
illuminated)

Outside air is shut off. Air within the
vehicle is recirculated.

Interior Comfort

Climate Control System

6-7

í

Some models.

Mazda3_8X41-EA-07F_Edition1 Page185
Wednesday, April 25 2007 1:5 PM

Form No.8X41-EA-07F

«
...
183
184
185
186
187
...
»

Summary of Contents for 2008 MazdaSpeed3











































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2008 MazdaSpeed3

Brand: JANE Pages: 6

Brand: Hama Pages: 2

Brand: Calix Pages: 5

Brand: TBC Pages: 12

Brand: Audi Pages: 9

Brand: Belkin Pages: 4

Brand: U & Me Brothers Pages: 6

CB-796IG2-CIGD-R

Brand: CARRYBOY Pages: 4

Brand: GMC Pages: 428

signal mirror 2005-2009 Ford Mustang

Brand: muth Pages: 9

Brand: TBC Pages: 12

Brand: Prorack Pages: 14

Brand: M7 SPEED Pages: 6

Brand: Brodit Pages: 2

Brand: v.link Pages: 21

Brand: Linear Logic Pages: 8

Brand: Ford Pages: 52

Brand: Truma Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands