Mazda 2008 MazdaSpeed3 Owner'S Manual Download Page 157 | Manualshive

Page: 157 / 394

background image

Black plate (157,1)

q

Brake System Warning Light

This warning has the following functions:

Parking brake warning

The light comes on when the parking
brake is applied with the ignition switch
in the START or ON position. It goes off
when the parking brake is fully released.

Low brake fluid level warning

If the light stays on after the parking brake
is fully released, you may have a brake
problem.

Drive to the side of the road and park off
the right-of-way.

You may notice that the pedal is harder to
push or that it may go closer to the floor.
In either case, it will take longer to stop
the vehicle.

1. With the engine stopped, check the

brake fluid level immediately and add
fluid as required (page 8-23).

2. After adding fluid, check the light

again.

If the warning light remains on, or if the
brakes do not operate properly, do not
drive the vehicle. Have it towed to an
Authorized Mazda Dealer.

Even if the light goes out have your brake
system inspected as soon as possible by
an Authorized Mazda Dealer.

NOTE

Having to add brake fluid is sometimes an
indicator of leakage. Consult an Authorized
Mazda Dealer as soon as possible even if the
brake light is no longer illuminated.

WARNING

Do not drive with the brake system
warning light illuminated. Contact an
Authorized Mazda Dealer to have the
brakes inspected as soon as possible:

Driving with the brake system
warning light illuminated is
dangerous. It indicates that your
brakes may not work at all or that
they could completely fail at any
time. If this light remains
illuminated, after checking that the
parking brake is fully released, have
the brakes inspected immediately.

q

ABS Warning Light

í

The warning light stays on for a few
seconds when the ignition switch is turned
to the ON position.

If the ABS warning light stays on while
you're driving, the ABS control unit has
detected a system malfunction. If this
occurs, your brakes will function normally
as if the vehicle had no ABS.
Should this happen, consult an Authorized
Mazda Dealer as soon as possible.

Driving Your Mazda

Warning/Indicator Lights and Beep Sounds

5-39

í

Some models.

Mazda3_8X41-EA-07F_Edition1 Page157
Wednesday, April 25 2007 1:5 PM

Form No.8X41-EA-07F

«
...
155
156
157
158
159
...
»

Summary of Contents for 2008 MazdaSpeed3











































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2008 MazdaSpeed3

Brand: AAMP of America Pages: 6

Brand: Daihatsu Pages: 340

Brand: ABL Pages: 176

Brand: ABL Pages: 94

Electronic Parking Disc II

Brand: Jacob Jensen Pages: 28

Brand: Alpine Pages: 69

Brand: Allen Sports Pages: 2

Brand: TBC Pages: 12

Brand: Subaru Pages: 99

Brand: Chevrolet Pages: 428

Brand: Metra Electronics Pages: 5

Brand: Renkforce Pages: 4

Brand: Motoalliance Pages: 5

Brand: APS Pages: 3

MultiCharger 1204

Brand: DEFA Pages: 28

Brand: Steelmate Pages: 14

Brand: Kia Pages: 233

Brand: Mercedes-Benz Pages: 585

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands