Black plate (300,1)
3. Install the new socket and bulb
assembly in the reverse order of
removal.
NOTE
l
If the halogen bulb is accidentally touched,
it should be cleaned with rubbing alcohol
before being used.
l
Use the protective cover and carton for the
replacement bulb to dispose of the old bulb
promptly and out of the reach of children.
Low-beam bulb
(Xenon fusion bulb)
You cannot replace the low beam bulbs by
yourself.
The bulbs must be replaced at an
Authorized Mazda Dealer.
(Halogen bulb)
1. Disconnect the electrical connector
from the bulb by pulling it to the rear.
2. Pull off the sealing cover.
3. Unhook the bulb retaining spring.
4. Swing the retaining spring out and
away to free the headlight bulb.
5. Carefully remove the socket and bulb
assembly by pulling it straight back.
6. Remove the headlight bulb from the
socket.
7. Install the new socket and bulb
assembly in the reverse order of
removal.
8-38
Maintenance and Care
Owner Maintenance
Mazda5_8X53-EA-07I_Edition1 Page300
Monday, September 3 2007 10:42 AM
Form No.8X53-EA-07I
Summary of Contents for 2008 Mazda5
