Drive (not shown)
Drive is activated when the transmission control switch is pressed.
•
This position allows for all forward gears except overdrive.
•
O/D OFF lamp is illuminated.
•
Provides engine braking.
•
Use when driving conditions cause excessive shifting from O/D to
other gears. Examples: city traffic, hilly terrain, heavy loads, trailer
towing and when engine braking is required.
•
To return to O/D (overdrive mode), press the transmission control
switch. The O/D OFF lamp will not be illuminated.
•
O/D (Overdrive) is automatically returned each time the key is turned
off.
2 (Second)
Use 2 (Second) to start-up on slippery roads or to provide additional
engine braking on downgrades.
1 (First)
•
Provides maximum engine braking.
•
Allows upshifts by moving gearshift lever.
•
Will not downshift into 1 (First) at high speeds; allows for 1 (First)
when vehicle reaches slower speeds.
Forced downshifts
•
Allowed in
(Overdrive) or Drive.
•
Depress the accelerator to the floor.
•
Allows transmission to select an appropriate gear.
MANUAL TRANSMISSION OPERATION (IF EQUIPPED)
Using the clutch
The manual transmission has a starter interlock that prevents cranking
the engine unless the clutch pedal is fully depressed.
1
3
5
2
4
R
2006 B-Series (mbs)
Owners Guide (post-2002-fmt)
Canadian_French (fr_can)
Driving
151