screwdriver or cutter.
Fig. 75: Removing Front Airdam Skirt (BP With TC)
Courtesy of MAZDA MOTORS CORP.
FRONT AIRDAM SKIRT INSTALLATION (BP WITH TC)
1. If installing a new front airdam skirt, perform the following procedure:
1. Using a cutter, remove any remaining double-sided tape from the front bumper.
2. Remove any grease or dirt from the front bumper affixing surface.
2. If reusing the front airdam skirt, perform the following procedure:
1. Using a cutter, remove any remaining double-sided tape from the front airdam skirt and body.
WARNING:
Using a cutter with bare hands can cause injury. Always wear
gloves when using a cutter.
WARNING:
Using a cutter with bare hands can cause injury. Always wear gloves
when using a cutter.
NOTE:
If installing a new front airdam skirt, double-sided adhesive tape is already
affixed to the skirt.
2005 Mazda MX-5 Miata
2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata
Microsoft
Saturday, July 04, 2009 12:04:28 PM
Page 73
© 2005 Mitchell Repair Information Company, LLC.
