Mazda 2005 Mazda6 Sports Sedan Owner'S Manual Download Page 286

Page: 286 / 340

(5-Door)

1. Turn the knob and remove the cover.

Left side

Right side

2. Pull the strap and remove the cover.

3. Turn the socket and bulb assembly

counterclockwise and remove it.

4. Disconnect the bulb from the socket.

Brake lights/Taillights

Rear turn signal lights

5. Install the new bulb in the reverse order

of removal.

NOTE

To replace the bulb, contact an
Authorized Mazda Dealer.

8-36

Maintenance and Care

Owner Maintenance

Summary of Contents for 2005 Mazda6 Sports Sedan





















































































































































































































































































































































Search results

Summary of Contents for 2005 Mazda6 Sports Sedan

Reviews:

Related manuals for 2005 Mazda6 Sports Sedan

Brands by name

Popular brands

Mazda 2005 Mazda6 Sports Sedan, Owner'S Manual

Search results

Summary of Contents for 2005 Mazda6 Sports Sedan

Reviews:

Related manuals for 2005 Mazda6 Sports Sedan

Brands by name

Popular brands