Mazda 2003 MX-5 Miata Manual Download Page 58

Page: 58 / 256

3-20

Knowing Your Mazda

Doors and Locks

Form No. 8R09-EA-02G

5. Insert the top covering’s rear edge into

the groove in the body molding.

▼

Raising the Convertible Top

1. Park the vehicle on a level surface and

firmly set the parking brake.

2. Lower the side windows, then turn off

the ignition.

3. Pull down the sunvisors.

4. Undo the fasteners and straps.

5. Remove the top covering and store it

properly in the trunk.

6. Unlock the top latches and open them

fully.

7. Hold the top lift handle and pull the top

up and forward until it’s against the
windshield header.

8. After securely hooking the top latches

onto the windshield header, push each
latch up with the palm of your hand
until the lock buttons click and the
latches are locked.

Never drive with the top partially
folded or uncovered. Otherwise the top
and/or the top covering could be
damaged.

Top covering

Body

Molding

CAUTION

Sunvisor

Windshield header

J07R_8R09_EA_02G.book Page 20 Monday, July 1, 2002 11:30 AM

Summary of Contents for 2003 MX-5 Miata

































































































































































































































































Search results

Summary of Contents for 2003 MX-5 Miata

Reviews:

Related manuals for 2003 MX-5 Miata

Brands by name

Popular brands

Mazda 2003 MX-5 Miata, Manual

Search results

Summary of Contents for 2003 MX-5 Miata

Reviews:

Related manuals for 2003 MX-5 Miata

Brands by name

Popular brands