Mazda 2003 MX-5 Miata Manual Download Page 115

Page: 115 / 256

5-33

Driving Your Mazda

Switches and Controls

Form No. 8R09-EA-02G

▼

Windshield Wipers

Turn the wipers on by pulling the lever
down.

INT

— Intermittent

— Normal

— Fast

One-touch wipers

For a single wiping cycle, push the lever
forward and release it.

▼

Windshield Washer

Pull the lever toward you and hold it to
spray washer fluid.

If the washer doesn’t work, inspect the
fluid level (page 8-22). If it’s OK, consult
an Authorized Mazda Dealer.

OFF

INT

NOTE

In the OFF or INT position, the wipers
will be activated until the lever is
released.

J07R_8R09_EA_02G.book Page 33 Monday, July 1, 2002 11:30 AM

Summary of Contents for 2003 MX-5 Miata

































































































































































































































































Search results

Summary of Contents for 2003 MX-5 Miata

Reviews:

Related manuals for 2003 MX-5 Miata

Brands by name

Popular brands

Mazda 2003 MX-5 Miata, Manual

Search results

Summary of Contents for 2003 MX-5 Miata

Reviews:

Related manuals for 2003 MX-5 Miata

Brands by name

Popular brands