5-15
Driving Your Mazda
Starting and Driving
Form No. 8Q42-EA-01F
▼
To Increase Cruising Speed
Follow either of these procedures.
•
Turn the control knob to RESUME/
ACCEL and hold it. Your vehicle will
accelerate.
Release the knob at the speed you
want.
•
Accelerate to the desired speed.
Turn the control knob to SET/COAST
and release it immediately.
▼
To Decrease Cruising Speed
Turn the control knob to SET/COAST and
hold it. The vehicle will gradually slow.
Release the knob at the speed you want.
▼
To Resume Cruising Speed at
More Than 40 km/h (25 mph)
If some other method besides the CRUISE
MAIN was used to cancel cruising speed
and the system is still activated, the most
recent set speed will automatically resume
when the control knob is turned to
RESUME/ACCEL.
If vehicle speed is below 40 km/h (25
mph), increase the vehicle speed up to 40
km/h (25 mph) and turn the control knob
to RESUME/ACCEL.
NOTE
Accelerate if you want to speed up
temporarily when the cruise control is
on. Greater speed will not interfere
with it or change the set speed.
Take your foot off the accelerator to
return to the set speed.
Control knob
Control knob
Control knob
Control knob
J07L_8Q42-EA-01F.book Page 15 Tuesday, March 5, 2002 3:14 PM
Summary of Contents for 2002 Mazda MX-5
