Mazda 2002 Mazda MX-5 Owner'S Manual Download Page 62

Page: 62 / 252

3-26

Knowing Your Mazda

Doors and Locks

Form No. 8Q42-EA-01F

5. Align the rear deck latches with the

rear deck studs and set the hardtop
squarely onto the body.

6. Slide the hardtop forward while

pressing down on the rear deck latches
to lock the latches, and then verify that
they are secure by attempting to lift the
rear of the hardtop.

7. Push each top latch up with the palm of

your hand until the lock buttons click
and the latches are locked.

Rear deck stud

Hardtop

Rear deck latch

•

Be careful not to strike the body
with any of the protruding hardtop
latches.

•

The rear defogger grid and the
defogger cord could be damaged
when removing or installing the top.
Make sure the rear defogger grid
isn’t folded and the defogger cord
isn’t caught between the vehicle’s
body and the top.

CAUTION

J07L_8Q42-EA-01F.book Page 26 Tuesday, March 5, 2002 3:14 PM

Summary of Contents for 2002 Mazda MX-5





























































































































































































































































Search results

Summary of Contents for 2002 Mazda MX-5

Reviews:

Related manuals for 2002 Mazda MX-5

Brands by name

Popular brands

Mazda 2002 Mazda MX-5, Owner'S Manual

Search results

Summary of Contents for 2002 Mazda MX-5

Reviews:

Related manuals for 2002 Mazda MX-5

Brands by name

Popular brands