Mazda 2002 Mazda MX-5 Owner'S Manual Download Page 59

Page: 59 / 252

3-23

Knowing Your Mazda

Doors and Locks

Form No. 8Q42-EA-01F

•

When removing the hardtop, make sure
objects inside the vehicle aren’t blown
away by the wind.

•

Secure all loose objects inside when
driving with the hardtop removed.

•

Don’t drive through an automatic car
wash; it may damage the hardtop.

•

Don’t remove or install the hardtop
when the wind is strong; the wind
could damage the hardtop.

•

When removing the hardtop, make sure
the operation is performed by 2
persons.

•

Before removing the hardtop, lower the
antenna.

•

Removing the hardtop while it’s wet
can cause water to drip into the
passenger compartment.

▼

Removing the Detachable
Hardtop

1. Park the vehicle on a level surface and

firmly set the parking brake.

2. Lower the side windows, then turn off

the ignition.

3. Pull down the sunvisors.

4. Push the unlock buttons and fully

release the top latches.

5. Push the unlock buttons and fully

release the side latches.

6. Disconnect the rear window defroster

coupler.

Sunvisor

Unlock button

Top latch

Unlock button

Side latch

Rear window defroster coupler

J07L_8Q42-EA-01F.book Page 23 Tuesday, March 5, 2002 3:14 PM

Summary of Contents for 2002 Mazda MX-5





























































































































































































































































Search results

Summary of Contents for 2002 Mazda MX-5

Reviews:

Related manuals for 2002 Mazda MX-5

Brands by name

Popular brands

Mazda 2002 Mazda MX-5, Owner'S Manual

Search results

Summary of Contents for 2002 Mazda MX-5

Reviews:

Related manuals for 2002 Mazda MX-5

Brands by name

Popular brands