Mazda 2 2011 Owner'S Manual Download Page 219

Page: 219 / 345

Black plate (218,1)

2. Loosen the lug nuts by turning them

counterclockwise one turn each, but do
not remove any lug nuts until the tire
has been raised off the ground.

3. Place the jack on the ground.

4. Turn the jack screw in the direction

shown in the figure and adjust the jack
head so that it is close to the jack-up
position.

Jack head

5. Place the jack under the jack-up

position closest to the tire being
changed with the jack head squarely
under the jack-up point.

Jacking position

6. Continue raising the jack head

gradually by rotating the screw with
your hand until the jack head is
inserted into the jack-up position.

Tire blocks

Jacking position

7-8

In Case of an Emergency

Flat Tire

Mazda2_8CC8-EC-11H_Edition1 Page218
Wednesday, July 20 2011 9:35 AM

Form No.8CC8-EC-11H

Summary of Contents for 2 2011


























































































































































































































































































































































Search results

Summary of Contents for 2 2011

Reviews:

Related manuals for 2 2011

Brands by name

Popular brands

Mazda 2 2011, Owner'S Manual

Search results

Summary of Contents for 2 2011

Reviews:

Related manuals for 2 2011

Brands by name

Popular brands