AS 090-M11411cma0709
Page 1 of 8
Genuine Accessories
Installation Instructions
Part Number
0000-8G-L12
Applicable Models:
2010 > Mazda 3 s-model w/o Air Dam
Package Contents
Front Mask
Tools Required
Stubby Phillips
Screwdriver
Scissors
Front End Cover (Qty. 1)
0
Before Installation
A. Area to be covered by mask must be clean. It is recommended that you wash and wax vehicle prior to installation.
B. Both vehicle and mask must be completely dry prior to installation. If moisture under mask is allowed to dry on
vehicle, paint may cloud.
C. Any repainted surfaces in contact with mask must be allowed to cure completely. Consult paint manufacturer or
repair facility if you are not sure.
D. Dealers should provide all customers with a copy of these installation instructions for future reference.
1
Cut out license plate flap on front end cover
A. If state or provincial law requires
use of front license plate, cut
hole out in license plate cutout
area (A) using scissors. Slip
opening around bracket.
Caution: Cut out section
previous to mask installation,
making sure to not cut elastic
straps.
A
U-Nut (Qty. 8)
Snap Head Screw (Qty. 8)
Washer (Qty. 8)
