Mazak VTC-160A, Maintenance Manual, Page: 23 / 96

2-1
2 SAFETY PRECAUTIONS
The precautions to be observed to ensure safe operation of the machine are described here.
The machine must not be operated until these precautions have been thoroughly understood.
2-1 Rule
1. This section contains the precautions to be observed as to the working methods and states
usually expected. Of course, however, unexpected operations and/or unexpected working
states may take place at the user site.
During daily operation of the machine, therefore, the user must pay extra careful attention to its own
working safety as well as to observe the precautions described below.
2. The meanings of our safety precautions to DANGER, WARNING, and CAUTION are as
follows:
DANGER
: Failure to follow these instructions could result in loss of life.
WARNING
: Failure to observe these instructions could result in serious harm to a human
life or body.
CAUTION
: Failure to observe these instructions could result in minor injuries or serious
machine damage.
2-2 Basic Safety Items
DANGER
l
There are high voltage terminals on the electrical control panel, transformer, motors,
junction boxes, and other equipment (with a battery warning mark attached).
l DO NOT touch any of them under any circumstances.
l
Make sure that all doors and safety covers are fitted before switching on the power. If any
door or safety cover must be removed, shut off and lock the main breaker first.
HGMCGA0044E
Return to Library