USER INSTRUCTIONS
(Original Instructions)
Maytag Washer - MHN30PNA
READ THE INSTRUCTIONS
OPERATING INSTRUCTIONS:
1.
Sort and load clothes (max. 8.5 kg).
2
. Close door.
3.
Add High Efficiency (HE) detergent,
fabric softener, and bleach to dispenser
drawer as appropriate. Follow the
manufacturer’s instructions to
determine the amount of products to
use.
4.
Select desired program for fabric type
and washer will start automatically.
SAFETY INFORMATION:
CLOTHES TYPE Setting
WASH/RINSE Temperature
Whites
Hot/Cold
Colors
Warm/Cold
Brights
Cold/Cold
Perm.Press
Delicates and Knits
Quick Cycle
Warm/Cold
Warm/Cold
Warm/Cold
•
This washer is intended only for washing of
clothes and textiles in water. Do not use for any
other purpose.
•
Door is locked during washer operation. Do not
attempt to open door until cycle has finished.
•
FIRE HAZARD:
Never place items in the washer
that contain petrol or other flammable fluids. No
washer can completely remove oil. Do not tumble
dry anything that has had any kind of oil on it
(including cooking oils). Doing so can result in
death, explosion, or fire.
•
This washer is not designed for washing items
which may create an explosive atmosphere inside
the washer and must not be used for this purpose.
•
Do not use hypochlorite additive, since this may
cause corrosion, and may result in component
failure under certain circumstances.
•
Do not use this washer if it appears to be damaged
or defective. Contact the owner.
•
This washer is not intended for use by persons
(including children) with reduced physical sensory,
mental capabilities, or lack of experience or
knowledge, unless they have been given supervision
or instruction concerning use of the washer by a
person responsible for their safety.
•
Children should be supervised to ensure that they
do not play with the washer.
•
Emergency stop control: The mains supply plug
should be disconnected in an emergency.
W10340722A - EN
© 2011
All rights reserved.
03/2011
In some European factories the letter “W” of the part code mentioned herein will be
automatically replaced by the number “4000” (e.g. “W12345678” becomes “400012345678”)
