10
ELECTRICAL REQUIREMENTS
EARTHING INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Electrical Connection Options
1.
Choose electrical connection type
Direct wire connection:
Go to steps 1–2
on page 11 for direct wire strain relief, then
steps 3–7 in “Direct Wire Connection”
section. Then go to “Venting Requirements.”
Power supply cord:
Go to steps 1–2 on
page 11 for power supply cord strain relief,
then steps 3–5 in “Power Supply Cord
Connection” section. Then go to “Venting
Requirements.”
A
B C D
E
2.
Remove terminal block cover
Before you start, disconnect power. Remove terminal block
cover (A).
A. Terminal block cover
B. Active screw
C. Ground screw
D. Neutral screw
E. Strain relief hole
ELECTRICAL CONNECTION
