Maytag Commercial MYR20, Service Manual

Page: 53 / 88

4-29
1. To remove the door glass, peel up the edge
of the rubber seal on the front of the door.
2. Pull the glass, from inside the door, and
work the rubber seal out of the door opening
all the way around the opening.
3. Support glass the entire time, and remove
the glass and rubber seal from the door.
4. To remove the rubber seal from the door
glass, peel the seal away from the edge of
the glass all the way around the glass.
5. To reinstall the rubber seal, position the
front lip of the rubber seal over the edge of
the door opening.
6. Work the lip of the seal over the edge all the
way around the door opening.
7. To reinstall the door glass, set the bottom
edge of the door glass inside the lip of the
seal.
8. Work the seal over the edge of the glass all
the way around the glass.
9. Rotate the door glass to make sure it is
properly seated in the rubber seal.
10. Test for proper operation of the door.
DOOr GLaSS