NOTE: Hardware for attaching Top, Control Box, and
Hand Control is included with the Base.
1. Align the holes in the Top with the holes in the
Mounting Plates and secure in place with eight #10 x
3/4 Screws.
2. Align the holes in the Control Box with the holes in
the underside of the Top and attach it with four #10 x
3/4 Screws.
3. Place the Switch in a comfortable and accessible
location on the underside of the Top and attach it with
two #6 x 5/8 Screws.
4. Route the column cables and the switch cable away
from moving components and secure them in place
with Cable Clamps and Screws.
ASSEMBLY INSTRUCTIONS
for DUAL XR BASE with
SINGLE TOP
I551 REV. 06 6-2016
(1)
Switch cable OVER
Cross Channel