MAYBACH COMAND AND REAR-CABIN AUDIOVISUAL SYSTEM, Operator'S Manual

Page: 213 / 319

213
At a Glance - Rear Cabin
Quick reference
Switching OFF
Turn the key in the steering lock to
position 0 and remove it,
or
Press

.
Switching the rear cabin control units
ON/OFF
Switching ON
Press key

at the display of the
desired rear cabin control unit,
or
With ignition ON, or with another
control unit switched ON, press
key

on the remote control.
The Audio/Video basic menu appears
in both cases. Should one of the rear
cabin control units be switched ON,
the other one adapts the selected op-
eration mode.
Switching OFF
Turn the key in the steering lock to
position 0 and remove it,
or
Press key

at the display of the
desired rear cabin control unit,
or
Press key

on the remote con-
trol.
Separate volume settings are possible for
navigation, telephone, and the voice
control system.
A common volume setting is provided for
the operation modes Radio, SAT, CD,
MP3, AUX1, AUX2, DVD, and TV.
The sound volume setting is stored auto-
matically for the currently activated op-
eration mode. The volume for voice
announcements can be adjusted sepa-
rately on the front cabin control unit
during an announcement.
i
Without the key in position 1 or 2 of
the steering lock, the system auto-
matically switches OFF again after ap-
prox. 30 minutes of inactivity.
i
Without the key in position 1 or 2 of
the steering lock, the system auto-
matically switches OFF again after ap-
prox. 30 minutes of inactivity.
Setting sound volume