MAYBACH COMAND AND REAR-CABIN AUDIOVISUAL SYSTEM, Operator'S Manual

Page: 169 / 319

169
Voice Control System – Front Cabin
Telephone operation
“Delete”
Using the command “Delete” will erase
all digits entered. The system then
prompts you to start your input again.
Sample dialog:
“Redial”
Use the command “Redial” to dial the
last dialed number.
Managing an automated answering sys-
tem/voice mail box
Activate the Voice Control System to ac-
cess and manage your answering ma-
chine/voice mail box.
Activate the Voice Control System
during a phone call (
page 164).
An audible tone (beep) confirms the
activation of the system.
Speak the required digits (“Zero” to
“Nine”).
or
Speak the required words “Star” and
“Pound”.
Speak the final command “Dial”.
The system dials the number entered.
s
Dial number
t
The number, please
s
Zero one three zero
t
Zero one three zero
s
Five zero zero five
t
Five zero zero five
s
Delete
t
The number is removed, go
ahead
s
Four two seven three
t
Four two seven three
s
Three nine one
t
Three nine one
s
Dial
t
Calling
i
You can also dial the telephone num-
ber spoken by doing the following
(instead of using the command “Di-
al”):
Briefly pull the operating lever to
position
!
or
Press button
s
on the multifunc-
tion steering wheel.
Keep in mind that the system starts
dialing before all numbers are recited
in full.