MAYBACH COMAND AND REAR-CABIN AUDIOVISUAL SYSTEM, Operator'S Manual

Page: 131 / 319

131
Navigation – Front Cabin
Route guidance
Route guidance
Route guidance can be started if the des-
tination input is complete and
Start Route Guidance
is displayed at the
bottom of the main area.
Besides starting route guidance the fol-
lowing soft keys are available:
Map
soft key:
Allows access to further destination
input directly via road map
(
page 127).
POIs
soft key:
For entering a POI near the destina-
tion street (
page 154).
Mode
soft key
Provides access to the route mode
setting for certain road types to be
avoided (
page 115).
Save
soft key
Stores the entered destination in the
destination memory (
page 151).
To start route guidance, press

.
The route is calculated and route
guidance begins.
Depending on the distance to the desti-
nation, route calculation can take some
time. While the route is being calculated,
Reading Navi DVD... Please Wait
and an arrow
pointing towards the destination are dis-
played. Once route calculation is com-
plete, route guidance begins.
Because of changes in local traffic pat-
terns (e.g. road works) and/or incom-
plete data, errors in calculation may
occur.
As a result, the recommended route may
deviate from the ideal route. The data
stored on the DVD only reflects local con-
ditions at the time of DVD production.
DVD maps may not cover all areas nor all
routes within an area.
The system will calculate a new route
during active route guidance if the driver
fails to follow the route guidance.
During recalculation,
NEW RTE
is dis-
played. The arrow is not solid.
Starting route guidance
Route calculation
Route re-calculation