MAYBACH COMAND AND REAR-CABIN AUDIOVISUAL SYSTEM, Operator'S Manual

Page: 121 / 319

121
Navigation – Front Cabin
Destination input
Enter city (USA)
appears on the display
in the status bar. The characters in paren-
thesis indicate the selected region
(
page 120).
Accepting the displayed destination
Press and hold

for approx. 2 sec-
onds.
Entering a different city
Use the keypad menu or the 12 butt-
ton keypad to enter the data of the
city (
page 117).
After entering the city a selection list
of cities appears. Now continue with
selecting a city.
Switching to a selection list is possible at
any time while entering a city.
Press the
List
soft key.
The selection list appears. Now con-
tinue with selecting a city.
Selecting a city
Press

or

to select the destina-
tion city. The
Page
soft keys allow
scrolling through the list page by
page.
Press

.
After selecting the desired city, one
of the following menus appears:
For larger cities with more than 15
streets:
Enter street menu ( page 123).
For smaller cities with up to
15 streets:
Select street menu ( page 123).
If no streets are registered for the
selected city, or if a street extends
through several city centers:
Select center menu ( page 122).
The appropriate menu can be identified
from the display in the status bar.
i
Do not confuse the

key with the
the symbol in the main screen.
ok
i
The selection is cancelled if the
Back
soft key is pressed.