MAYBACH COMAND AND REAR-CABIN AUDIOVISUAL SYSTEM, Operator'S Manual

Page: 11 / 319

11
Introduction
Symbols
Symbols
The following symbols are used in this
operation manual:
This symbol highlights instruc-
tions to be followed.
A number of these symbols ap-
pearing in succession indicates
a multiple-step procedure.
This continuation symbol indi-
cates an interrupted proce-
dure, being continued on the
next page.
page This symbol tells you where to
look for further information
on the subject.
Display
Words appearing on the CO-
MAND display or multifunc-
tion display are printed in the
type shown here.
s This symbol stands for com-
mands and voice entries you
are speaking.
t This symbol stands for voice
output by the system.
u This symbol indicates that in-
formation is available on the
main display.
Warning
G
Warning notices draw your attention to
hazards that may endanger your health or
life, or the health or life of others.
Environmental note
H
An environmental note offers advice con-
cerning environmental protection.
i
Hints or further helpful information.
!
Highlights hazards that may result in
damage to your COMAND or rear-
cabin audiovisual system.